20 / 22 / 24SWG ASTM A269 TP321H Stainless Steel Welded Tube With Bright Annealed Surface
SSWBAT03
Material: 321,321H, 1.4541; 347/347H,1.4550,1.4961; 317,317L,1.4449,1.4438;
Get Quote![20 / 22 / 24SWG ASTM A269 TP321H Stainless Steel Welded Tube With Bright Annealed Surface, SSWBAT03 20 / 22 / 24SWG ASTM A269 TP321H Stainless Steel Welded Tube With Bright Annealed Surface, SSWBAT03](https://www.mtstainlesssteel.com/upload/big/20__22__24SWG_ASTM_A269_TP321H_Stainless_Steel_Welded_Tube_With_Bright_Annealed_Surface_1_0_1491530007.jpg)
20 / 22 / 24SWG ASTM A269 TP321H welding stainless steel , cold drawn welded tubes
Stainless steel seamless bright annealed tube's final surface is polished and bright annealed. And the polished grade is includes 180 # , 320 # , 400 # , 600 # , 800 # . According to standard very strictly , tubes which produced by us always have correct OD and WT tolerance. And they are very suitable for chromatography industry.
Where can be used ?
1 . General service industries ( petroleum , food , chemical , paper , fertilizer , fabric , aviation and nuclear
2 . Fluid , gas and oil transport
3 . Pressure and heat transmission
4 . Construction and ornament
5 . Boiler heat exchangers
6 . Decorative usage ( road lamp facilities , bridge handrail , expressway railing , bus stop , airport and gymnasium ) boiler , auto parts , medical equipment , building materials , food industry
Chemical Composition :
Material | ASTM A269 Chemical Composition % Max | ||||||||||
C | Mn | P | S | Si | Cr | Ni | Mo | N B | Nb | Ti | |
TP304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^. | ^ |
TP304L | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
TP316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
TP316L | 0.035 D | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
TP321 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0.70 |
TP347 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ |
MTSCO has been dedicated to producing bright annealed tubes since 2014 , owning complete producing technology and abundant managing experience . And the raw material such as mother tube , round bar we use is from Chinese biggest and well-known steel mill : Walsin , Yongxing etc . Also we have advanced NDT equipments for the tests such as Eddy Current test , Ultrasonic test , Hydraulic test and so on . Welcome you contact us in free !
Corrosion Test | If clients need will be conducted |
Chemical Analysis | Will be tested as per required quality standards |
Destructive / Mechanical Testing | Tensile / Hardness / Flattening |
Eddy Current Testing | Using digital flaw-mark testing System to do test and mark in surface homogeneities |
Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s . |
Air Under Pressure Test | To check any evidence of air leakage |
Visual Inspection | After passivation, every single length of tubes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Welded Pipe: Welded Tube
![ASTM A249 / ASME SA249 TP304 / 304L Stainless Steel Bright Annealed Welded Tube With Cold Drawn](https://www.mtstainlesssteel.com/upload/middle/ASTM_A249__ASME_SA249_TP304__304L_Stainless_Steel_Bright_Annealed_Welded_Tube_With_Cold_Drawn_1_0_1491733343.jpg)
ASTM A249 / ASME SA249 TP304 / 304L Stainless Steel Bright Annealed Welded Tube With Cold Drawn
Stainless steel seamless bright annealed tube’s final surface is polished and bright annealed. And the polished grade is includes 180#, 320#, 400#, 600#, 800#. According to standard very strictly, tubes which produced by us always have correct OD and WT tolerance. And they are very suitable for chr......![ASTM B619 Alloy S / UNS N06635 Nickel Alloy Welded Tube](https://www.mtstainlesssteel.com/upload/middle/1_ASTMB619AlloySUNSN06635NickelAlloyWeldedTube_1684734567.jpg)
ASTM B619 Alloy S / UNS N06635 Nickel Alloy Welded Tube
1. Material Grade: Alloy S, Alloy C276/N10276, Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022, Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc 2. Outer Diameter: 3.18mm-101.6mm Wall Thickness: 0.5mm-20mm 3. Length: Normally fixed length 6......![UNS S31803 / S32205 / S32750 Duplex Steel Welded Tube For Heat Exchanger](https://www.mtstainlesssteel.com/upload/middle/UNS_S31803__S32205__S32750_Duplex_Steel_Welded_Tube_For_Heat_Exchanger_1_0_1494470359.jpg)
UNS S31803 / S32205 / S32750 Duplex Steel Welded Tube For Heat Exchanger
1.Material Grade S32205, S31803, S32304, S32750, F51, F53, 2205, 2507 etc 2.Outer Diameter3.18mm to 101.6mm 3.Wall Thickness 0.5mm to 20mm 4.Length Normally fixed length 6m, can as per customer’s requirement 5.Standard ASTM A789; ASTM A790; EN 10216-5ect. 6.Process Method Cold Drawn or Cold Ro......![6mm TP317 Small Diameter ERW Stainless Steel Bright Annealed Welded Tube](https://www.mtstainlesssteel.com/upload/middle/6mm_TP317_Small_Diameter_ERW_Stainless_Steel_Bright_Annealed_Welded_Tube_1_0_1491733511.jpg)