English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM A268 17.1mm*2.31mm Stainless Steel 410S Tube For Industry
410S Tube:
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition
minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
410S Tube Chemical Properties:
C | Mn | Si | P | S | Cr | Ni | |
410S | 0.08 max | 1.00 max | 1.00 max | 0.04 max | 0.03 max | min: 11.5 | - |
410S Tube Mechanical Properties:
Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Rockwell B) MAX |
410S | 64.4 (444) | 42 (290) | 33 | 75 |
410S Tube Physical Properties:
Density | Thermal Conductivity | Electrical | Modulus of | Coefficient of | Specific Heat | Melting |
at 68°F: 0.280 | 187 at 212°F | 23.7 at 68°F | 29 | 6.0 at 32 – 212°F | 0.11 at 68°F to 212°F | 2700 to 2790 |
7.5 at 68 – 1200°F |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Pipe: Ferritic Stainless Steel
ASTM A268 TP410 Stainless Steel Seamless Pipe For Industry
TP410 is the basic and typical martensitic steel alloy. It has the high hardness with good ductility and a relatively limited corrosion-resistant capability.TP410 material does not have the nickel content and has a relatively low material cost. Mtsco supply TP410 Stainless Steel Seamless Pip......
ASTM A268 1/2 Inch Stainless Steel Seamless/Welded 405 Tube
Stainless Steel Seamless/Welded 405 Tube is a 12% chromium steel, designed to be used in the as welded condition. Unlike other grades in the 12% chromium category, 405 is not susceptible to extensive hardening through air cooling from high temperature....
ASTM A268 17.1mm*2.31mm Stainless Steel 410S Tube For Industry
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition ...
