S30403 / S31603 1 / 4 Inch Stainless Steel U Bend Heat Exchanger Welded Tube
SSHEWT10
Material: 304, 1.4301, X5CrNi18-10; 304H, S30415, 1.4948, S30409; 304L, 1.4306, S30403, 1.4307; 316L, 1.4401, 1.4404, 1.4435; 316Ti, S31615, 1.4571, S31635;
Get Quote![S30403 / S31603 1 / 4 Inch Stainless Steel U Bend Heat Exchanger Welded Tube, SSHEWT10 S30403 / S31603 1 / 4 Inch Stainless Steel U Bend Heat Exchanger Welded Tube, SSHEWT10](https://www.mtstainlesssteel.com/upload/big/S30403__S31603_1__4_Inch_Stainless_Steel_U_Bend_Heat_Exchanger_Welded_Tube_1_0_1494913355.jpg)
S30403 / S31603 1 / 4 Inch Stainless Steel U Bend Heat Exchanger Welded Tube
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
Process : |
1 . We use Cold Drawn techonology to produce U bend tube |
2 . U bend tubes produce will accordance to customer's drawings |
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate |
4 . The radius is checked for its OD and wall thinning with the recommended specification |
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test |
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test |
7 . Each tube is then hydro tested at the recommended pressure to check for leakage |
Chemical Composition
C(max) | Si(max) | P(max) | S(max) | Cr | Ni | Mo | Ti | |
TP304/1.4301 | 0.080 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-10.5 | ||
TP304L/1.4307 | 0.035 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
TP304H/1.4948 | 0.04-0.10 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
TP316/1.4401 | 0.080 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
TP316L/1.4404 | 0.035 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
TP316Ti/1.4571 | 0.080 | 1.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
TP321/1.4541 | 0.080 | 1.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
TP317L/1.4449 | 0.080 | 1.00 | 0.045 | 0.030 | 18.0-20.0 | 11.0-14.0 | 3.0-4.0 | |
TP347H/1.4912 | 0.04-0.10 | 1.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-13.0 | ||
TP309S/1.4833 | 0.080 | 1.00 | 0.045 | 0.030 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
TP310S/1.4845 | 0.080 | 1.00 | 0.045 | 0.030 | 24.0-26.0 | 19.0-22.0 | 0.75 |
Grade | TP 304 ; TP304H ; TP304L ; TP316 ; TP316L ; TP 321 ; TP321H ; TP317L ; TP310S ; TP347H |
Standard
| ASTM A213 , ASTM A 269 , ASTM A 270 , EN10216-5 ; ASTM B 622 ; ASTM B516 ; ASTM A789 , etc |
Size | OD :3.18mm to 101.6mm |
WT : | 0.5mm to 20mm |
Length : | 12192mm |
Advantage | Superior surface finish , better mechanical property ; more precise dimension ; perfect inspection method and inspection equipment |
Application | Boiler tube applies to petroleum , chemical industry , electric power , boiler , high temperature resistant , low temperature resistant , corrosion resistant . The size can be made according to the customers requirements . High pressure boiler pipe applies to container , petrochemical and so on . Note : Generally , high pressure boiler pipe's working pressure above 9.88Mpa and working temperature between 450 to 650 . |
Package | Plywood case |
Specifications :
DN | NPS(Inch) | D(mm) | SCH5S | SCH10S | SCH40S | STD | SCH40 | SCH80 | XS | SCH80S | SCH160 | XXS |
6 | 1/8 | 10.30 | - | 1.24 | 1.73 | 1.73 | 1.73 | 2.41 | 2.41 | 2.41 | - | - |
8 | 1/4 | 13.70 | - | 1.65 | 2.24 | 2.24 | 2.24 | 3.02 | 3.02 | 3.02 | - | - |
10 | 3/8 | 17.10 | - | 1.65 | 2.31 | 2.31 | 2.31 | 3.20 | 3.20 | 3.20 | - | - |
15 | 1/2 | 21.30 | 1.65 | 2.11 | 2.77 | 2.77 | 2.77 | 3.73 | 3.73 | 3.73 | 4.78 | 7.47 |
20 | 3/4 | 26.70 | 1.65 | 2.11 | 2.87 | 2.87 | 2.87 | 3.91 | 3.91 | 3.91 | 5.56 | 7.82 |
25 | 1 | 33.40 | 1.65 | 2.77 | 3.38 | 3.38 | 3.38 | 4.55 | 4.55 | 4.55 | 6.35 | 9.09 |
32 | 1 1/4 | 42.20 | 1.65 | 2.77 | 3.56 | 3.56 | 3.56 | 4.85 | 4.85 | 4.85 | 6.35 | 9.70 |
40 | 1 1/2 | 48.30 | 1.65 | 2.77 | 3.68 | 3.68 | 3.68 | 5.08 | 5.08 | 5.08 | 7.14 | 10.15 |
50 | 2 | 60.30 | 1.65 | 2.77 | 3.91 | 3.91 | 3.91 | 5.54 | 5.54 | 5.54 | 8.74 | 11.07 |
65 | 2 1/2 | 73.00 | 2.11 | 3.05 | 5.16 | 5.16 | 5.16 | 7.01 | 7.01 | 7.01 | 9.53 | 14.02 |
80 | 3 | 88.90 | 2.11 | 3.05 | 5.49 | 5.49 | 5.49 | 7.62 | 7.62 | 7.62 | 11.13 | 15.24 |
90 | 3 1/2 | 101.60 | 2.11 | 3.05 | 5.74 | 5.74 | 5.74 | 8.08 | 8.08 | 8.08 | - | - |
100 | 4 | 114.30 | 2.11 | 3.05 | 6.02 | 6.02 | 6.02 | 8.56 | 8.56 | 8.56 | 13.49 | 17.12 |
125 | 5 | 141.30 | 2.77 | 3.40 | 6.55 | 6.55 | 6.55 | 9.53 | 9.53 | 9.53 | 15.88 | 19.05 |
150 | 6 | 168.30 | 2.77 | 3.40 | 7.11 | 7.11 | 7.11 | 10.97 | 10.97 | 10.97 | 18.26 | 21.95 |
200 | 8 | 219.10 | 2.77 | 3.76 | 8.18 | 8.18 | 8.18 | 12.70 | 12.70 | 12.70 | 23.01 | 22.23 |
250 | 10 | 273.10 | 3.40 | 4.19 | 9.27 | 9.27 | 9.27 | 15.09 | 12.70 | 12.70 | 28.58 | 25.40 |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Welded Pipe: Welded Tube
![ASTM B619 / B626 Alloy 230 / UNS N06230 Nickel Alloy Welded Tube](https://www.mtstainlesssteel.com/upload/middle/1_ASTMB619B626Alloy230UNSN06230NickelAlloyWeldedTube_1684734662.jpg)
ASTM B619 / B626 Alloy 230 / UNS N06230 Nickel Alloy Welded Tube
Material Grade: Alloy C-2000 / UNS N06200, Alloy G-35 / UNS N06035, Alloy G-30 / UNS N06030, Alloy G-30 / UNS N06030, Alloy S / UNS N06635, Alloy 230 / UNS N06230, Alloy 556 / UNS R30556 Outer Diameter:3.18mm-101.60mm Wall Thickness:0.50mm-20.00mm Length: Normally fixed length 6m, can as per cu......![ASTM A249 TP316L / 1.4404 Straight Stainless Steel Welded tubing With ERW / EFW](https://www.mtstainlesssteel.com/upload/middle/ASTM_A249_TP316L__14404_Straight_Stainless_Steel_Welded_tubing_With_ERW__EFW_1_0_1519449699.jpg)
ASTM A249 TP316L / 1.4404 Straight Stainless Steel Welded tubing With ERW / EFW
Application a) For fluid & gas transport b) Structure & machining etc Advantages a) Advanced technology of cold draw machine b) Advanced annealing machine c) Better mechanical property d) More precise dimension e) Perfect inspection method and inspection equipment etc Process : 1 ......![ASTM A249 304L / 316L Stainless Steel Welded Tube For Heat Exchanger](https://www.mtstainlesssteel.com/upload/middle/ASTM_A249_304L__316L_Stainless_Steel_Welded_Tube_For_Heat_Exchanger_1_0_1481251733.jpg)
ASTM A249 304L / 316L Stainless Steel Welded Tube For Heat Exchanger
Material Grade: TP304, TP304L, TP304H, TP316, TP316L, TP316Ti, TP309S, TP310S, TP321, TP321H, TP347, TP347H, etc Outer Diameter:5.80mm-2032mm (0.23 to 80) Wall Thickness: 0.25mm-28mm (0.01 to 1.125) Length: Normally fixed length 6m, can as per customer’s requirement Standard: ASTM A312; ASTM A2......![UNS S32205 / S32750 / S32760 Bright Annealed ERW Duplex Steel Welded Tube](https://www.mtstainlesssteel.com/upload/middle/UNS_S32205__S32750__S32760_Bright_Annealed_ERW_Duplex_Steel_Welded_Tube_1_0_1494472341.jpg)