ASTM A213 / ASTM SA213 TP316L/ S31603 Annealed & Pickled Straight Heat Exchanger Tube
SSHE10
Price: From $4500-9000USD/TON
Material: 316L, 1.4401, 1.4404, 1.4435;
Get Quote![ASTM A213 / ASTM SA213 TP316L/ S31603 Annealed & Pickled Straight Heat Exchanger Tube, SSHE10 ASTM A213 / ASTM SA213 TP316L/ S31603 Annealed & Pickled Straight Heat Exchanger Tube, SSHE10](https://www.mtstainlesssteel.com/upload/big/ASTM_A213__ASTM_SA213_TP316L_S31603_Annealed__Pickled_Straight_Heat_Exchanger_Tube_1_0_1513411702.jpg)
ASTM A213 / ASTM SA213 TP316L/ S31603 Annealed & Pickled Straight Heat Exchanger Tube
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
ASTM A213 / A213M Chemical Composition :
Elements | 304L(wt%) S30403 | 304(wt%) S30400 | 316L (wt%) S31603 | 316 (wt%) S31600 |
(C) Carbon, max | 0.035 | 0.08 | 0.035 | 0.08 |
(Mn) Manganese, max | 2 | 2 | 2 | 2 |
(P) Phosphorus, max | 0.045 | 0.045 | 0.045 | 0.045 |
(S) Sulfur, max | 0.03 | 0.03 | 0.03 | 0.03 |
(Si) Silicon, max | 1 | 1 | 1 | 1 |
(Ni) Nickel | 8.0 - 12.0 | 8.0 - 11.0 | 10.0 - 14.0 | 10.0 - 14.0 |
(Cr) Chromium | 18.0 - 20.0 | 18.0 - 20.0 | 16.0 - 18.0 | 16.0 - 18.0 |
(Mo) Molybdenum | N/A | N/A | 2.0 - 3.0 | 2.0 - 3.0 |
(Fe) Iron | Bal. | Bal. | Bal. | Bal. |
(Cu) Copper | N/A | N/A | N/A | N/A |
(N) Nitrogen | N/A | N/A | N/A | N/A |
Application
a) For fluid & gas transport
b) Structure & machining etc
Advantages
a) Advanced technology of cold draw machine
b) Advanced annealing machine
c) Better mechanical property
d) More precise dimension
e) Perfect inspection method and inspection equipment etc
Process :
1 . We use Cold Drawn techonology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
![SAF2507 Seamless Duplex Steel Tube 1 Inch Sch80 33.4 x 4.55 mm](https://www.mtstainlesssteel.com/upload/middle/SAF2507_Seamless_Duplex_Steel_Tube_1_Inch_Sch80__334_x_455_mm_1_49_1478581375.jpg)
SAF2507 Seamless Duplex Steel Tube 1 Inch Sch80 33.4 x 4.55 mm
Material Grade: S32205 , S31803 , S32304 , S32750 , F51 , F53 , 2205 , 2507 etc Outer Diameter:3.18mm - 101.60mm Wall Thickness: 0.50mm - 20.00mm Length: Normally fixed length 6m , can as per customer’s requirement Standard: ASTM A789 ; ASTM A790 ; EN 10216-5 etc. Process Method: Cold Drawn......![PE ASTM A790 Stainless Duplex Steel Pipe Seamless 6000MM](https://www.mtstainlesssteel.com/upload/middle/PEASTMA790StainlessDuplexSteelPipeSeamless6000MM_1_528_1614055314.jpg)
PE ASTM A790 Stainless Duplex Steel Pipe Seamless 6000MM
Duplex stainless steel was developed to combat common corrosion problems encountered with the 300 series stainless steels. “ Duplex ” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The advantage of a duplex str......![ASTM A789 1 / 2 Inch S31803 1.4462 Duplex Stainless Steel Tube With High Tensile Strength](https://www.mtstainlesssteel.com/upload/middle/ASTM_A789_1__2_Inch_S31803_14462_Duplex_Stainless_Steel_Tube_With_High_Tensile_Strength_1_0_1513405861.jpg)