English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
25.4mm TP321/347H Stainless Steel Pickled Heat Exchanger Tube
Material: 321,321H, 1.4541; 347/347H,1.4550,1.4961;
Get Quote
25.4mm TP321/347H Stainless Steel Pickled Heat Exchanger Tube
ASTM A 213 / A 213M ASME SA213 / SA213M Specification for Seamless Ferric and Austenitic Alloy -Steel Boiler , Su[perheater , and Heat-Exchanger Tubes
ASTM A 249 / A 249M Specification for Welded Austenitic Steel Boiler , Superheater , Heat-Exchanger , and Condenser tubes
Heat Exchanger Material Chemical Composition:
| C(max) | Si(max) | Mn(max) | P(max) | S(max) | Cr | Ni | Mo | Ti | |
| TP304/1.4301 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-10.5 | ||
| TP304L/1.4307 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP304H/1.4948 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 8.0-12.0 | ||
| TP316/1.4401 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |
| TP316L/1.4404 | 0.035 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | |
| TP316Ti/1.4571 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 0.7>5x(C+N) |
| TP321/1.4541 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-12.0 | 0.7>5x(C+N) | |
| TP317L/1.4449 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | 11.0-14.0 | 3.0-4.0 | |
| TP347H/1.4912 | 0.04-0.10 | 1.00 | 2.00 | 0.045 | 0.030 | 17.0-19.0 | 9.0-13.0 | ||
| TP309S/1.4833 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 22.0-24.0 | 12.0-15.0 | 0.75 | |
| TP310S/1.4845 | 0.080 | 1.00 | 2.00 | 0.045 | 0.030 | 24.0-26.0 | 19.0-22.0 | 0.75 |
Heat Exchanger Tube Application :
Heat exchanger tube applies to petroleum , chemical industry , electric power , boiler , high temperature resistant , low temperature resistant , corrosion resistant . The size can be made according to the customers requirements . High pressure boiler pipe applies to container , petrochemical and so on .
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
2507 / 2205 ASTM A790 / ASME SA790 Stainless Steel Duplex Steel Tube With Cold Rolled
ASTM A790 2507 duplex steel pickling tube are always purchased by the clients who need high corrosion tubes . Compared to stainless steel tubes , duplex steel tubes have more higher corrosion ability . They can be used in sea industry . Material Grade: S32205 , S31803 , S32304 , S32750 , F5......
PE ASTM A790 Stainless Duplex Steel Pipe Seamless 6000MM
Duplex stainless steel was developed to combat common corrosion problems encountered with the 300 series stainless steels. “ Duplex ” describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The advantage of a duplex str......
ASTM A789 1 / 2 Inch S31803 1.4462 Duplex Stainless Steel Tube With High Tensile Strength
Duplex Seamless tube is a special type of stainless steel tube that consists of two crystalline organizations, austenite and ferrite. This tube has excellent corrosion resistance and high strength, combining the superior corrosion resistance of austenitic stainless steel with the high strength chara......
