English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
Alloy 600/601 Cold Rolled Nickel Alloy U Tube With Annealed & Pickling Surface
Get Quote
Alloy 600/ 601 Cold Rolled Nickel Alloy U Tube With Annealed & Pickling Surface
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
| Grade | Alloy 600; Alloy 601; Alloy 800; Alloy 825; TP304 ; TP304H ; TP304L ; TP316 ; TP316L; S31803 |
Standard | ASTM B622; ASTM B516; ASTM B444; ASTM B829; ASTM A789; ASTM A213; ASTM A269; ASTM A270; EN10216-5 ,etc |
| Size | Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm |
| WT : 1.2-2.77mm | |
| Length | According to customer needs up to 20m |
| Advantage | Superior surface finish , better mechanical property ; more precise dimension ; perfect inspection method and inspection equipment |
Heat Exchange Tube Application :
a) Petroleum , chemical enterprise , super heater of boiler and heat exchanger
b) High temperature-resistant transmission fluid pipe in power station
c) Ship with pressure pipe
d) Exhaust purification device
e) Construction and ornament
f) solar industry , military , semiconductor etc
Alloy 600 Heat Exchange Tube Chemical composition:
| % | Ni | Cr | Fe | C | Mn | Si | S | Cu |
| min | 72.0 | 14.0 | 6.0 | |||||
| max | 17.0 | 10.0 | 0.15 | 1.00 | 0.50 | 0.015 | 0.50 |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
SAF2507 / 1.4410 Duplex Steel Tube, 1 / 2 Inch 12SWG For Pipelines
Material Grade: S32205 , S31803 , S32304 , S32750 , F51 , F53 , 2205 , 2507 etc Outer Diameter: 3.18mm - 101.6mm Wall Thickness: 0.5mm - 20mm Length: Normally fixed length 6m , can as per customer’s requirement Standard： ASTM A789 ; ASTM A790 ; EN 10216-5 ect . Process Method：Cold Drawn or C......
U bend tube
Hydraulic test for u tube Size: Diameter 12mm-63.5mm or 1/2''-2.5''; Wall Thickness 0.5mm-5.16mm; Length: up to 30meters; Type: Hairpin U-bend tube with one 180 degree bend; Square U-bend tube with two 90 degree bend; Specification ASTM B622 C276 (UNS N10276) Seamless Eddy ......Get Quote
*Your email address will not be published. Required fields are marked.
