English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM A213 TP304/316 Stainless Steel Straight Heat Exchanger Tube
Material: 304, 1.4301, X5CrNi18-10; 316L, 1.4401, 1.4404, 1.4435;
Get Quote
ASTM A213 TP304/316 Stainless Steel Straight Heat Exchanger Tube
Heat Exchanger Tube:
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry, water heater industry, air-conditioning industry, etc. This kind of seamless tube has a very important position in our all products.
Heat Exchanger Tube Chemical Composition :
| Material | C | Mn | P | S | Si | Cr | Ni | Mo | N B | Nb | Ti |
| TP304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ^ | ^ | ^. | ^ |
| TP304L | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-12.0 | ^ | ^ | ^ | ^ |
| TP316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP316L | 0.035 D | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-15.0 | 2.00-3.00 | ^ | ^ | ^ |
| TP321 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | ^ | ^ | ^ | 5C -0.70 |
| TP347 | 0.08 | 2 | 0.045 | 0.03 | 1 | 17.0-19.0 | 9.0-12.0 | 10C -1.10 | ^ |
Heat Exchanger Tube Process :
1 . We use Cold Drawn technology to produce U bend tube
2. U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation, inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different positions or as customers require to make sure tubes quality. We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
U bend tube
Hydraulic test for u tube Size: Diameter 12mm-63.5mm or 1/2''-2.5''; Wall Thickness 0.5mm-5.16mm; Length: up to 30meters; Type: Hairpin U-bend tube with one 180 degree bend; Square U-bend tube with two 90 degree bend; Specification ASTM B622 C276 (UNS N10276) Seamless Eddy ......
Duplex Stainless Steel Seamless Tube S31803 / S32205 / S32750
MTSCO has 26 cold-drawing production lines. And the annual production capacity is 5000 tons, the annual GDP is more than 30 million USD. 1 . Seamless tube : small diameter seamless overlength coiled tubing , bright annealed tube , inside and outside polished tube , heat exchanger tube , U-bent ......
