ASTM A213/269 Heat Exchange Stainless Steel Tubing With A&P Surface For Pressure Vessel
Material: Alloy 400, UNS N04400; Alloy 625, UNSN06625; Alloy 601, UNSN06601; Alloy 600, UNSN06600; Alloy 825, UNSN08825, 2.4858; S32750,1.4410, 2507, F53; S32205, S31803, 1.4462; 316L, 1.4401, 1.4404, 1.4435; 304L, 1.4306, S30403, 1.4307;
Get Quote![ASTM A213/269 Heat Exchange Stainless Steel Tubing With A&P Surface For Pressure Vessel, ASTM A213/269 Heat Exchange Stainless Steel Tubing With A&P Surface For Pressure Vessel,](https://www.mtstainlesssteel.com/upload/big/ASTMA213269HeatExchangeStainlessSteelTubingWithAPSurfaceForPressureVessel_1_592_1622513247.jpg)
ASTM A213/269 Heat Exchange Stainless Steel Tubing With A&P Surface For Pressure Vessel
Grade: TP304 ; TP304H ; TP304L ; TP316 ; TP316L ; TP 321 ; TP321H ; TP317L ; TP310S ; TP347H
Standard: ASTM A213 , ASTM A 269 , ASTM A789 , etc
Size: Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm
WT : 1.2-2.77mm
Length: According to customer needs up to 20m
ASTM A269 Heat Exchanger Tube Material Chemical Composition :
Elements | 304L(wt%) S30403 | 304(wt%) S30400 | 316L (wt%) S31603 | 316 (wt%) S31600 |
(C) Carbon, max | 0.035 | 0.08 | 0.035 | 0.08 |
(Mn) Manganese, max | 2 | 2 | 2 | 2 |
(P) Phosphorus, max | 0.045 | 0.045 | 0.045 | 0.045 |
(S) Sulfur, max | 0.03 | 0.03 | 0.03 | 0.03 |
(Si) Silicon, max | 1 | 1 | 1 | 1 |
(Ni) Nickel | 8.0 - 12.0 | 8.0 - 11.0 | 10.0 - 14.0 | 10.0 - 14.0 |
(Cr) Chromium | 18.0 - 20.0 | 18.0 - 20.0 | 16.0 - 18.0 | 16.0 - 18.0 |
(Mo) Molybdenum | N/A | N/A | 2.0 - 3.0 | 2.0 - 3.0 |
(Fe) Iron | Bal. | Bal. | Bal. | Bal. |
(Cu) Copper | N/A | N/A | N/A | N/A |
(N) Nitrogen | N/A | N/A | N/A | N/A |
Heat Exchanger Tube Production Process :
1 . We use Cold Drawn techonology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
MTSCO is a leading manufacturer who is specialized in seamless tubes , bright annealed tubes , seamless coiled tubing etc . MTSCO has the most advanced producing and testing equipment . We can totally satisfy your requirement .
Our heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
![SAF2507 / 1.4410 Duplex Steel Tube, 1 / 2 Inch 12SWG For Pipelines](https://www.mtstainlesssteel.com/upload/middle/SAF2507__14410_Duplex_Steel_Tube_1__2_Inch_12SWG_For_Pipelines_1_0_1513406940.jpg)
SAF2507 / 1.4410 Duplex Steel Tube, 1 / 2 Inch 12SWG For Pipelines
Material Grade: S32205 , S31803 , S32304 , S32750 , F51 , F53 , 2205 , 2507 etc Outer Diameter: 3.18mm - 101.6mm Wall Thickness: 0.5mm - 20mm Length: Normally fixed length 6m , can as per customer’s requirement Standard: ASTM A789 ; ASTM A790 ; EN 10216-5 ect . Process Method:Cold Drawn or C......![3 / 4 Inch S32750 / S32760 Small Diameter Duplex Steel Tube With Rapid Cooling](https://www.mtstainlesssteel.com/upload/middle/3__4_Inch_S32750__S32760_Small_Diameter_Duplex_Steel_Tube_With_Rapid_Cooling_1_0_1513406565.jpg)
3 / 4 Inch S32750 / S32760 Small Diameter Duplex Steel Tube With Rapid Cooling
Material Grade: S32205 , S31803 , S32304 , S32750, F51 , F53 , 2205 , 2507 etc Outer Diameter: 3.18mm - 101.6mm Wall Thickness: 0.5mm - 20mm Length: as per customer’s requirement Standard: ASTM A789 ; ASTM A790 ; EN 10216-5etc. Application a) Petroleum b) Chemical indust......![Nickel Alloy 625/825 Heat Exchanger Tube BA/AP Surface For Chemical Equipment](https://www.mtstainlesssteel.com/upload/middle/NickelAlloy625825HeatExchangerTubeBAAPSurfaceForChemicalEquipment_1_608_1623807102.jpg)