English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
Nickel Alloy Cold Rolled Heat Exchange Tube Alloy 625/UNS N06625 For Pressure Vessel
Material: Alloy 400, UNS N04400; Alloy 625, UNSN06625; Alloy 601, UNSN06601; Alloy 600, UNSN06600; Alloy 825, UNSN08825, 2.4858; Alloy 800, UNS N08800; S32750,1.4410, 2507, F53; S32205, S31803, 1.4462; 316L, 1.4401, 1.4404, 1.4435; 304L, 1.4306, S30403, 1.4307;
Get Quote
Nickel Alloy Cold Rolled Heat Exchange Tube Alloy 625/UNS N06625 For Pressure Vessel
Grade: Alloy 600; Alloy 601; Alloy 800; Alloy 825; TP304 ; TP304H ; TP304L ; TP316 ; TP316L; S31803
Standard: ASTM B622; ASTM B516; ASTM B444; ASTM B829, etc
Size :Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm
WT : 1.2-2.77mm
Length : According to customer needs up to 20m
Heat Exchange Tube Application :
a) Petroleum , chemical enterprise , super heater of boiler and heat exchanger
b) High temperature-resistant transmission fluid pipe in power station
c) Ship with pressure pipe
d) Exhaust purification device
e) Construction and ornament
f) solar industry , military , semiconductor etc
Nickel Alloy 625 Heat Exchange Tube Chemical composition:
| % | Ni | Cr | Mo | Fe | C | Mn | Si | P | S | Co | Nb+Ta | Al | Ti |
| min | 58.0 | 20.0 | 8.0 | 3.15 | |||||||||
| max | 23.0 | 10.0 | 5.0 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 1.00 | 4.15 | 0.40 | 0.40 |
MTSCO heat exchanger tube with pickling and annealing surface is very popular in boilers and heat exchangers industry , water heater industry , air-conditioning industry etc . This kind of seamless tubes are have a very important position in our all products .
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
DN80 ASTM A789 / A790 Annealed & Pickled Duplex Steel Pipe
Description : 1 . Outer Diameter : 10.3mm -1219mm Material Grade : S32205 , S31803 , S32304 , S32750, F51 , F53 , F55 , F61 , 2205 , 2507 Etc 2 . Wall Thickness :1.24mm - 59.54mm 3 . Length : As per customer's requirement 4 . Standard : ASTM A789 ; ASTM A790 ; EN 10216-5 etc. Wel......
1 / 4 Inch Sch40 ASTM A789 F53 Annealed & Pickeled Duplex Steel Tube
ASTM A790 2507 duplex steel pickling tube are always purchased by the clients who need high corrosion tubes . Compared to stainless steel tubes , duplex steel tubes have more higher corrosion ability . They can be used in sea industry . Material Grade S32205 , S31803 , S32304 , S32750, F51 ,......
