English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM A268 Tube TP410 Stainless Steel SMLS Tube For Industry
Get Quote
ASTM A268 Tube TP410 Stainless Steel SMLS Tube For Industry
ASTM A268 TP410 Tube:
TP410 is the basic and typical martensitic steel alloy. It has the high hardness with good ductility and a relatively limited corrosion-resistant capability.TP410 material does not have the nickel content and has a relatively low material cost.
Mtsco supply TP410 Stainless Steel Seamless Pipes & Tubes to Oil & Gas, Refineries, Fertilizers, Heat-Exchangers, Paper & Pulp, Pharmaceuticals, Chemicals, Water Treatment, Dairy, Sugar & Food Processing, Construction, Mining, Shipbuilding, Offshore, Defence, Ports, Railway, Nuclear Power, Power Plant, Cement, Government Org., Engineering Co., Oil Mills, and other industrial projects.
ASTM A268 TP410 TubeComposition Ranges:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 410 | ≤0.15 | ≤1 | ≤1 | ≤0.04 | ≤0.03 | 11.5- 13.5 | - | - | - | - |
ASTM A268 TP410 Tube Advantages:
-Harding by heat treatment
-High hardness with good ductility
-Good corrosion resistance capability
-Good wear corrosion resistance
-High cold-deformation property
ASTM A268 TP410 Tube Mechanical Properties:
| Tempering Temperature (0C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof (MPa) | Elongation (% in 50mm) | Hardness Brinell (HB) | Impact Charpy V (J) |
|---|---|---|---|---|---|
| Annealed * | 480 min | 275 min | 16 min | - | - |
| 204 | 1310 | 1000 | 16 | 388 | 30 |
| 316 | 1240 | 960 | 14 | 325 | 36 |
| 427 | 1405 | 950 | 16 | 401 | # |
| 538 | 985 | 730 | 16 | 321 | # |
| 593 | 870 | 675 | 20 | 255 | 39 |
| 650 | 755 | 575 | 23 | 225 | 80 |
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Pipe: Ferritic Stainless Steel
ASTM A268 TP410 Stainless Steel Seamless Pipe For Industry
TP410 is the basic and typical martensitic steel alloy. It has the high hardness with good ductility and a relatively limited corrosion-resistant capability.TP410 material does not have the nickel content and has a relatively low material cost. Mtsco supply TP410 Stainless Steel Seamless Pip......
ASTM A268 17.1mm*2.31mm Stainless Steel 410S Tube For Industry
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition ...
ASTM A268 1/2 Inch Stainless Steel Seamless/Welded 405 Tube
Stainless Steel Seamless/Welded 405 Tube is a 12% chromium steel, designed to be used in the as welded condition. Unlike other grades in the 12% chromium category, 405 is not susceptible to extensive hardening through air cooling from high temperature....
