English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
ASTM B619 Alloy S / UNS N06635 Nickel Alloy Welded Pipe
SSNAWP03
Material: Alloy S, UNS N06635;
Get Quote
ASTM B619 Alloy S / UNS N06635 Nickel Alloy Welded Pipe
1. Material Grade: Alloy S, Alloy C276/N10276, Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022, Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc
2. Outer Diameter: 10.3mm-426mm
Wall Thickness: 1.24mm-40.49mm
3. Length: Normally fixed length 6m, can as per customer's requirement
4. Standard: ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect
Alloy S Chemical composition:
| % | Ni | Cr | Mo | Fe | Co | W | C | Mn | Si | P | S | Al | Cu | La | B |
| min | balance | 14.5 | 14.0 | - | - | - | - | 0.30 | 0.20 | -- | - | 0.10 | - | 0.01 | - |
| max | 17.0 | 16.5 | 3.0 | 2.0 | 1.00 | 0.020 | 1.00 | 0.75 | 0.020 | 0.015 | 0.50 | 0.35 | 0.10 | 0.015 |
Physical properties:
| Density | 8.75 g/cm3 |
| Melting range | 1335-1380℃ |
Features:
Alloy S has excellent thermal stability, low thermal expansion and excellent oxidation resistance at 1093℃. It has good high temperature and thermal fatigue strength. It retains its strength and ductility after aging at temperatures of 427 to 871℃. Hastelloy S is particularly suitable for cyclical heating conditions where components must be capable of retaining their strength, ductility and metallurgical integrity after long time exposure.
Applications:
Industrial furnaces, and gas turbine engine seal rings.
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Welded Pipe: Nickel Alloy Welded Pipe
ASTM B619 / B626 Alloy 230 / UNS N06230 Nickel Alloy Welded Pipe
Material Grade :Alloy C-2000 / UNS N06200, Alloy G-35 / UNS N06035, Alloy G-30 / UNS N06030,Alloy G-30 / UNS N06030, Alloy S / UNS N06635, Alloy 230 / UNS N06230, Alloy 556 / UNS R30556 Outer Diameter: 3.18mm-101.60mm Wall Thickness: 0.50mm-20.00mm Length: Normally fixed length 6m, can as per c......
ASTM B619 Alloy S / UNS N06635 Nickel Alloy Welded Pipe
1. Material Grade: Alloy S, Alloy C276/N10276, Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022, Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc 2. Outer Diameter: 10.3mm-426mm Wall Thickness: 1.24mm-40.49mm 3. Length: Normally fixed length 6m, ca......
ASTM B619 / ASME SB619 Alloy C276 Nickel Alloy Welded Pipe
Nickel Alloy C276, also known as Hastelloy C276, is a high performance nickel-based alloy. It has excellent corrosion resistance and is particularly suited to extreme chemical environments. Its key properties include: Corrosion resistance: C276 alloy exhibits excellent corrosion resistance in a wid......
