English
中 文
Español
Português
Deutsch
Türk
Pусский
عربي
한국인
日本語
Stainless Steel 316L Seamless Heat Exchanger Tube U Bend Cold Rolled Tube For Desalination
Material: 316L, 1.4401, 1.4404, 1.4435;
Get Quote
Stainless Steel 316L Seamless Heat Exchanger Tube U Bend Cold Rolled Tube For Desalination
Heat Exchange Tube Production Process :
1 . We use Cold Drawn technology to produce U bend tube
2 . U bend tubes produce will accordance to customer's drawings
3 . To avoid oxidation , inert gas (Argon) is passed through tubes ID at the required flow rate
4 . The radius is checked for its OD and wall thinning with the recommended specification
5 . We'll choose three different position or as customer's require to make sure tubes quality . We'll do physical properties and micro-structure test
6 . Visual inspection for waviness and cracks is done with Dye Penetrant Test
7 . Each tube is then hydro tested at the recommended pressure to check for leakage
| Grade | TP304 ; TP304H ; TP304L ; TP316 ; TP316L ; TP 321 ; TP321H ; TP317L ; TP310S ; TP347H |
Standard | ASTM A213 , ASTM A 269 , ASTM A789 , etc |
| Size | Routine OD : 19.05mm,25.4mm,31.8mm,38.1mm |
| WT :1.2-2.77mm | |
Length | According to customer needs up to 20m |
| Application | Boiler tube applies to petroleum , chemical industry , electric power , boiler , high temperature resistant , low temperature resistant , corrosion resistant . The size can be made according to the customers requirements . High pressure boiler pipe applies to container , petrochemical and so on . |
| Package | Plywood case |
U bend Tube Advantage:
Superior surface finish
Better mechanical property
More precise dimension ;
Perfect inspection method and inspection equipment
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Tube: Annealed Pickled Heat Exchanger Tube
1.4462 / 1.4410 Cold Rolled Duplex Steel Welded Tube, ASTM A789 / ASME SA789
Material Grade: S32205 , S31803 , S32304 , S32750 , F51 , F53 , 2205 , 2507 etc Outer Diameter: 3.18mm - 101.6mm Wall Thickness: 0.5mm - 20mm Length: Normally fixed length 6m , can as per customer’s requirement Standard: ASTM A789 ; ASTM A790 ; EN 10216-5 ect . Process Method: Cold Drawn or Co......
