Alloy 20/ UNS N08020 Nickel Alloy Cold Rolled Plate/ Pipe, ASTM B729
Get Quote![Alloy 20/ UNS N08020 Nickel Alloy Cold Rolled Plate/ Pipe, ASTM B729, Alloy 20/ UNS N08020 Nickel Alloy Cold Rolled Plate/ Pipe, ASTM B729,](https://www.mtstainlesssteel.com/upload/big/1_Alloy20UNSN08020NickelAlloyColdRolledPlatePipeASTMB729_1707313670.jpg)
Alloy 20/ UNS N08020 Nickel Alloy Cold Rolled Plate/ Pipe, ASTM B729
Specifications of Nickel Alloy 20 Seamless Pipe:
Grade | Standard | Outside Diameter | 8mm-711mm |
Alloy 20 Alloy 600 Alloy 601Alloy 625 Alloy 825 Alloy 800/800H/800HT Alloy C276 Alloy C22 Alloy 400 Alloy K500 Alloy 200 Alloy 201 ... | ASTM-B729 ASTM-B444 ASTM-B167/163ASTM-B622 ASTM-B423 ...... | Wall Thickness | 1mm-50mm |
Length | ≤20m | ||
Inspection | Appearance/ Dimensional test, PMI; NDT: UT/ ET/ HT; Physical & chemical test | ||
Certificates | ISO/PED/AD2000/TS | ||
Package | End protection/ Woven bags/ Wooden cases |
Specifications of Nickel Alloy Plate:
Sheet | Plate | Strip | |
Thickness | <6mm | ≥6mm | 0.15mm-3mm |
Width | ≤1200mm | ≤2800mm | ≤1000mm |
Length | ≤3000mm | ≤8000mm | As customer’s requirement |
What is Nickel Alloy 20?
Alloy 20 (also known as Carpenter 20) is a nickel-iron-chromium austenitic alloy especially suited for maximum resistance to acid attack, especially sulfuric acid. Its chemical composition consists mainly of about 35% nickel, 20% chromium and 3.5-4.5% copper. In addition to this, Alloy 20 also contains elements such as molybdenum and iron, which give it good corrosion and wear resistance, high temperature strength, and high machinability.
Alloy 20 is considered a nickel-based alloy rather than a stainless steel because it contains high amounts of nickel, but also contains some amounts of chromium and other elements, which puts it on the border between stainless steel and nickel alloys in the traditional sense of the word by definition. Although there is sometimes debate as to whether to refer to it as Alloy 20 stainless steel or a nickel alloy, chemically it is more commonly categorized as a nickel-based alloy.
Alloy 20 is similar to conventional nickel alloys in terms of its welding characteristics, and is usually less prone to cold cracking and more prone to hot cracking. As a result, special attention needs to be paid to the sulfur and phosphorus content when welding to avoid possible welding defects.
In summary, Alloy 20 is a high-performance nickel-based alloy with good corrosion resistance and a wide range of uses, especially in the field of very aggressive inorganic acid solutions, chlorine and chloride-containing media, dry chlorine, formic acid and acetic acid, acetic anhydride, seawater and brine, and so on, to become the ideal medium of transport materials. Sulfuric acid environment, such as wet metallurgy and sulfuric acid industrial equipment and other fields.
Why Choose MTSCO Seamless Pipe?
1. Highly reliable seamless pipe manufacturer -MTSCO invested in a factory with 36 years of experience in pipe making, Huxin Pipe
2. Diversified pipe sizes - In addition to regular sizes, MTSCO can also produce 18 metres and 25 metres extension pipes
3. Complete production and inspection equipment - the factory is equipped with cold rolling mills, annealing furnaces, pickling pool, ultrasonic eddy current integration, physical and chemical lab, etc.
4. Complete quality control process--There are full-time MTSCO quality inspectors to control the whole process before/during/after production.
5. Complete certificates - ISO/PED/AD2000 certificates.
Production Process of MTSCO Seamless Pipe
VIP SERVICE
VR (Virtual) Mill Introduction
Professional Remote Technical Guidanceion
Accept Third-party Inspection
Door to Door Shipment
Get QuoteRelated Products: Seamless Pipe: Nickel Alloy Cobalt Alloy Seamless Pipe
![ASTM B622 / B619 Alloy C-2000 / UNS N06200 Nickel Alloy Pipe](https://www.mtstainlesssteel.com/upload/middle/1_ASTMB622B619AlloyC2000UNSN06200NickelAlloyPipe_1684479313.jpg)
ASTM B622 / B619 Alloy C-2000 / UNS N06200 Nickel Alloy Pipe
MTSCO is a leading manufacturer who is specialized in stainless steel seamless pipes , bright annealed tubes , seamless coiled tubing etc basic products . We also have duplex stainless steel tubes and pipes , nickel alloy tubes and pipes etc . MTSCO has the most advanced producing and testing equipm......![Alloy C22 / UNS N06022 Nickel Alloy Seamless Pipe For Chemical Industry](https://www.mtstainlesssteel.com/upload/middle/1_AlloyC22UNSN06022NickelAlloySeamlessPipeForChemicalIndustry_1684478981.jpg)
Alloy C22 / UNS N06022 Nickel Alloy Seamless Pipe For Chemical Industry
Material Grade: Alloy 625/N06625, Alloy 600/ N06600,Alloy 601/N06601,Alloy 718/N07718, Alloy C276/N10276, Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc Outer Diameter :10.3mm-406.4mm Wall Thickness: 1.24mm-40.49mm Length:Normally fixed length 6m, can as per customer's requirement......![Alloy 556 / UNS R30556 Nickel Alloy Seamless Pipe For Boiler](https://www.mtstainlesssteel.com/upload/middle/1_Alloy556UNSR30556NickelAlloySeamlessPipeForBoiler_1684479506.jpg)
Alloy 556 / UNS R30556 Nickel Alloy Seamless Pipe For Boiler
1. Material Grade: Alloy C-2000 / UNS N06200, Alloy G-35 / UNS N06035, Alloy G-30 / UNS N06030, Alloy G-30 / UNS N06030, Alloy S / UNS N06635, Alloy 230 / UNS N06230, Alloy 556 / UNS R30556, etc. 2. Outer Diameter: 3.18mm-101.60mm; 10.3-426mm Wall Thickness: 0.50mm-20.00mm; 1.24-......![ASME SB163 / SB423 Nickel Alloy Seamless Alloy 825 Pipe](https://www.mtstainlesssteel.com/upload/middle/ASMESB163SB423NickelAlloySeamlessAlloy825Pipe_1_537_1614229125.jpg)
ASME SB163 / SB423 Nickel Alloy Seamless Alloy 825 Pipe
Apart from nickel being the primary alloying material in the alloy 825 electropolish pipe, the alloy also contains elements such as iron, chromium, titanium, molybdenum, and copper. Alloy 825 has excellent resistance to chloride-ion-induced stress corrosion cracking, reducing environments contain......Get Quote
*Your email address will not be published. Required fields are marked.